The 20-Series brings the full choice of cut — strip, cross or particle — to a 20″ (508 mm) chamber at 30 to 40 HP (20 HP on the particle-cut), for mid-to-high volume destruction.
| Model | Materials | Cut | Piece size | HP | Capacity | Discharge | Optional configurations |
|---|---|---|---|---|---|---|---|
| 20-350C | Paper · cardboard | Strip-cut | 1/2″ (12.7 mm) | 30 / 40 HP | 350–370 sheets/pass | External | Output conveyor · 880 Tipper · HLS-Tipper · Bagholder |
| 20-350CX | Paper · cardboard | Cross-cut | 5/16″ × 2-1/2″ (7.9 × 63.5 mm) | 30 / 40 HP | 350–360 sheets/pass (20 lb bond) | External | Output conveyor · 880 Tipper · HLS-Tipper · Bagholder |
| 20-350PC | Paper · cardboard · plastic · e-scrap (HDD/SSD) | Particle-cut | 1/2″ × variable (12.7 mm × variable) | 20 / 40 HP | On request | External | Output conveyor · Infeed conveyor · HLS-Tipper |
Capacity shown is for the strip-cut (C) models; cross-cut and particle-cut throughput is lower, and full dimensions and weights are available on request. Standard cutter sizes shown — the approximate finished piece.
Note: Actual capacity and performance may vary depending on material properties, operating conditions, and available power supply. Specifications are subject to change without notice as part of our continuous product improvement program. Dimensions and weight exclude optional configurations.
Also destroys e-scrap. The 20-350PC particle-cut configuration also shreds hard drives and SSDs in bulk — see the Particle Cut line.
Engineer the feed, output and handling around the shredder.
Material, volume, and the result you need at the end. Help us understand your space — direct from the people who build the machine.
